Read the tips of our mascot ...
Newsletter 8
Adjustable Honing at Full Expansion
Easy operation, adjustable in diameter and in pressure, flexible and self-centering, allow to work and restore the entire surface of the cylinder,
although conical.
“The easiest method for adjusting the cylinder”.
Of easy functioning it is sufficient to apply it to a common hand drill or culumn drill, at the speed of 1500 – 2500 rpm.
Insert the arms into the hole adjusting pression according to your necessity. During work the arms inside the cylinder compresses the sectors against the side of the cylinder; centering itself automatically. A flexible bar inserted in the support gives a working possibility to all the surface even if it is conic.
The durability of the operation must be rapported to the speed of the drill. It is raccomended to lubricate always the honing stone and surface.
Our series of Great-Expansion Honing Tools is composed of five different models that can cover the machining from smaller cylinders, to those for motorcycles, cars and trucks.
Art. M/A 98A: Honing for trucks: ideals for diameters from 60 to 260 mm. Lenght of the stones 127 mm.
Art. M/A 98AR : Series of 3 stones for Honing for trucks.
Art. M/A 98V: Honing for cars: ideals for diameters from 50 to 160 mm. Lenght of the stones 100 mm.
Art. M/A 98VR : Series of 3 stones for Honing for cars.
Art. M/A 98M: Honing for motorbikes: ideals for diameters from 30 to 90 mm. Lenght of the stones 80 mm.
Art. M/A 98MR : Series of 3 stones for Honing for motorbikes.
Art. M/A 98P3: Honing for brakes cylindrers: ideals for diameters from 20 to 80 mm. Lenght of the stones 35 mm.
Art. M/A 98PR3 : Series of 3 stones for Honing for brakes cylindrers.
Art. M/A 98P2: Honing for brakes cylindrers: ideals for diameters from 20 to 80 mm. Lenght of the stones 35 mm.
Art. M/A 98PR2 : Series of 2 stones for Honing for brakes cylindrers.
For more information or for a complete list of our distributors, please contact us here
